ASUS CHICONY CNF7129 CAMERA DRIVER FOR MAC - Image capture just displays black image, usb communication in effect red indicator shows traffic flow working. And for Windows 10, you can get it from here: Also, the microphone does not function. Bus Device Work in progress, patches are available. It can detect webcam and install driver perfectly. I note on this.
Please refer to below FAQ to check your camera's PID code: BCF5B9FE9714&modelname=A3E&SLanguage=en-us 2. This driver is for below PID code: HardwareID1=USB Vid04f2&Pidb028&MI00 HardwareID2=USB Vid04f2&Pidb036&MI00 HardwareID3=USB Vid04f2&Pidb029&MI00 HardwareID4=USB Vid04f2&Pidb071&MI00 HardwareID5=USB Vid04f2&Pidb034&MI00 HardwareID6=USB Vid04f2&Pidb106&MI00 HardwareID7=USB Vid04f2&Pidb141&MI00 HardwareID8=USB Vid04f2&Pidb140&MI00 HardwareID9=USB Vid04f2&Pidb13a&MI00 HardwareID10=USB Vid04f2&Pidb16B&MI00 HardwareID11=USB Vid04f2&Pidb16E&MI00.
On my Asus-Notebook Windows has installed the usbvideo.sys driver for my webcam With this driver the picture is upside down in the camera app and also in Skype. ManfredThis has been an ongoing problem with ASUS notebooks. For convenience, ASUS installed their camera upside down in the lid of their notebook and customized the Windows 7 driver to flip the image. ASUS never upgraded their drivers to support Windows 8 and I don't expect they will for Windows 10 either.
Microsoft builds a universal driver usbvideo.sys that works fine for the camera but does not have a provision to flip the image. What remains needed is a registry option to flip the image for the Microsoft driver. Otherwise, our ASUS notebooks will be locked to Windows 7 forever.
Hi, thanks for the answer. Yes, I was thinking about to open my notebook and see if I can change the camera position. But I found a better solution.
It took me several hours, but today I found a driver that worked! It has the same VID-ID as the integrated Chicony cam. It is a Sonix driver 6.0.1223.1 for a FJ Webcam. I must installed it via the inf-file because the setup-file told my hardware not detected. With this driver the camera app worked! It was upside down too, but there was a flip setting in the registry. After this I installed Skype again and it worked to.:) Manfred.
Hi, thanks for the answer. Yes, I was thinking about to open my notebook and see if I can change the camera position. But I found a better solution. It took me several hours, but today I found a driver that worked!
It has the same VID-ID as the integrated Chicony cam. It is a Sonix driver 6.0.1223.1 for a FJ Webcam.
Chicony Cnf-7129 Camera Driver For Mac
I must installed it via the inf-file because the setup-file told my hardware not detected. With this driver the camera app worked! It was upside down too, but there was a flip setting in the registry. After this I installed Skype again and it worked to.:) ManfredCan you tell me how you installed it via the inf-file? I cannot seem to find any such file in the extraction. I searched a long time for a chicony driver that makes my webcam (USB 2.0 VGA UVC, Chicony) work on windows 10. I couldn't find a functioning one, the installation always failed to start.
Chicony Cnf-7129 Camera Driver For Macbook Pro
I also never found the.inf file stated in the previous posts. I wanted to share my solution on ASUS U36SD: 1.) Go in the device manager 2.) Go on top menu 'action' and then on 'add Legacy hardware' 3.) Go 'next' and then on 'select hardware manually.' 4.) Choose 'Imaging devices' 5.) Just ignore the list and click 'next' (in my case it was the Kyocera, 260ci. Driver) 6.) Be happy and have a working and rightly turned camera Maybe you need to uninstall your current driver beforehand. My system is in German, so the names can be slightly different than stated above.